DIY Mirror Frame to Headboard

I love garage sales…. but I must admit I hate getting up at the crack of dawn on a Saturday to go and snag the best item before the other early birds. I decided that I would go to a popular neighborhoods bi-annual sale. You could spend a whole day shopping, treasure hunting at this sale. They give out maps ahead of time so you can plan where you want to go depending on what street has the items you are looking for. I decided just to go without doing any research this time. I wanted to just have fun and look. Sometimes the best items are ones that many people overlook because it’s damaged or doesn’t look like a treasured find.

So at the end of my hunting around noon, I saw this frame laying on the grass in a homeowners yard. I asked, “How much?” She said, “Name your price.”  She was pretty much giving it away.  The owner said  it was a beautiful mirror that she had in her entry that fell and shattered. All that was left was the frame. She didn’t give me a chance to respond and said, “Two dollars!” So of course I bought it.

 

IMG_4571

Anyway I saw it and thought..hmmm..I could probably do something with it, I just didn’t know what that “something” was at the time.   It sat in my garage for a year.

So a year later I finally found a use for it. I had wanted to make a DIY headboard for the longest time but I wasn’t inspired to tackle the project yet. Then I saw this headboard from Horchow and decided to use my frame to make something similar.

FrmHorchow.BristolTuftedHeadboardSteps:

1. I glued the frame back together and wood spackled all of the missing carved details into the corners.

2. I painted and antiqued the frame in a silver finish. The existing finish would have been perfect but since I had to spackle some missing details, it needed a new coat of paint.

3. I purchased particle board and had it cut to size of the inside of the frame.

4. I measured and marked the location of holes for buttons and drilled the holes.

5. I spray adhered batting to the board to keep it in place. I then used a screw driver to punch holes thru the batting (this makes the tufting so much easier).

6. I then stapled my finished fabric to the particle board.

7. Then I tufted my headboard by using fishing wire to pull  the buttons as tight as I could to create the desired look. I stapled my fishing wire in a zig-zag pattern on the other side to keep in in place.

IMG_4616

Image below shows the batting facing the backside of the frame but I was just checking to make sure that I cut enough batting before I sprayed it to the particle board.

IMG_4618

Finished product

This is an image of my old bedroom. My new bedroom is getting a new look but I kept my headboard in the design. See my post with the inspiration board for the new bedroom here.


Masterbedwflower

Chair Makeover

chair makeover title

I purchased this preloved Cane-back barrel chair from Craigslist. I think I paid $15 for it.  It is in excellent condition but I believe it was the previous owners’ cat bed.

IMG_5962

Needless to say I had to completely strip the material and cushion from the chair.  I had another chair that will be updated at some point and it’s cushion was in perfect condition. So I used that cushion and altered it to fit my chair that I was working on. If I didn’t have this free one on hand I would have used a coupon from JoAnn Fabric or Hobby Lobby. They always have coupons online or through their phone apps.

I purchased this fabric on sale at JoAnn Fabric. Did you know that you can use the same coupon on two separate transactions?  Also they will accept competitor coupons that you can use in addition to their coupons. 

Here are the steps to the transformation

{DOWNLOAD SUPPLY LIST HERE}

1. Remove the existing materials-

I used a flathead screwdriver to pry the staples from the chair. I used pliers to pull the stubborn ones that broke halfway. Try and save the thin fabric that covers the hardware underneath the chair. It is usually grey or black.

IMG_5964

Examine the existing cushion and batting condition- Is it peeling, dusty, moldy etc? Then you should Replace it! If it is slightly discolored then that is ok. As long as it is not a health hazard, we can save it. If you need to buy a new cushion, measure your seat (LxW and down the front and right and left sides -where the back of your knees will touch). You will need to buy High Density Foam in 2″ or 3″ thickness and enough batting to cover your foam.  As I mentioned earlier this was used by a cat, so I discarded the cushion and batting then shopped in my garage for more. I cut it to size using sharp scissors to fit my chair.

2. Paint your chair-

I used spray paint because I found it was faster and easier to use with the cane weaving.  (One of the best spray paints for furniture is Krylon. You can quickly make second coats and it sticks very well.) Let the paint dry for 1 hour before moving on to step 3.

metallicgold

To save my hands I use this spray grip for my paint can. Here is one similar that you can buy.

IMG_5969

3. Seal the Finish-

Apply a wipe-on Polyurethane with a clean white rag or staining sponge and rub the polyurethane into your furniture like you would with furniture polish. You want a thin but even coat. Wait another 2 hours or overnight to let the sealant dry.

IMG_5970

4. Add your cushion and your batting-

IMG_5972I have enough overlap for the (behind the knee) area. I also overlapped the cushion on the right and left sides.

5. Now reupholster-

Load your gun with plenty of staples before you start. Cut your fabric to the shape of your chair. Be very careful around the legs because you want to make sure you have plenty fabric to tuck in these tight areas. Pull the fabric taut and staple very well all around and underneath to secure it properly.

IMG_5980